You are here which means you want to know the steps to update Belkin router firmware. In order to do that you, first need to download and save the updated firmware file from the official website to your PC. In case you come across any issue while downloading, immediately contact Belkin technical support team at Icognix.net for help.
Once the downloading is done follow the below steps to update Belkin router’s firmware. The below steps is given by Belkin technical support professionals.
Access the web-based setup page by opening any web browser. On the address bar, enter your router’s local IP address.
NOTE: The Belkin router’s default IP address is 192.168.2.1. If this doesn’t work, check your router’s IP address.
Click Login at the top-right corner of the page.
Enter your router’s Password if you have one. Otherwise, leave the field blank then click Submit.
On the Utilities in the left navigation panel, click Firmware Update.
Click Browse… and search for the file you saved previously.
Select the firmware file and click Open.
You will be prompted to continue with the upgrade. Click OK.
A prompt that advises you NOT to turn off or reboot the router at the end of the upgrade will appear. Click OK.
The firmware update status will then appear.
IMPORTANT: Make sure that you DO NOT INTERRUPT OR UNPLUG THE ROUTER during the update process.
Once the update is complete, you will be prompted to wait for several seconds.
Click OK after the router is done rebooting.
Even after following the above steps correctly, if the firmware is not updated, kindly contact Belkin technical support experts on Belkin technical support toll free number at 1-888-479-2017