Linksys Router Configuration
Linksys router users generally face several technical problems. One of the most common issues is difficulty in installation and configuration. Before finding the solution, let’s first understand what exactly is the problem?
The issue: It usually takes me a long time to setup my Linksys router. I never get configuration right at the first attempt. I always face issue while connecting my wireless printer to my network. These are some of the common issues faced a lot of Linksys router users.
The reality: Let’s take this reality that every network is unique, and getting the right combination of setting can be difficulty. We know it is painful and irritating to face technical problems with Linksys router when you actually need it badly and urgently.
In this article we bring you solution to your problem. The below article, created by Linksys Technical Support experts, list down the possible solution to overcome the Linksys router configuration difficulty.
Possible solution: A number of router providers tried to simplify it with easy-setup CDs or one-click connection buttons, but resolving everything became difficult. Router brands like Buffalo’s and Netgear’s setup instructions go the extra mile by explicitly detailing the order in which you need to you plug everything in before you run the CD. This is good — but it assumes you’ve read the printed instructions that came with the router. When was the last time you read the manual before you plugged in your new device?
Almost all routers have Web-based configuration screens, and as long as you remember the device’s IP address, default username and password (which you should have changed when you set it up), you should be able to get into the setup screens and make any adjustments you need. It’s just a matter of figuring out which adjustments are necessary.
If you have any questions, please contact to Linksys Technical Support. They can be reached on toll free number at
You can also read out article on How to Upgrade Linksys router’s firmware using web-based setup page