Tips to set up and add computers to your Belkin Router’s Wireless Network

PREMIUM TECH SUPPORT COMPANY

On the How do you want to add a network? Pop-up, click manually create a network profile.

Step 4:Technically, there are three best ways for adding computers to the network. In this article we will explain you all the three steps. Read the below steps by Belkin router support carefully.

  1. Connecting to the network
  2. Manually creating a network profile
  3. Adding it using the WPS button

 

Let’s first understand Step # 1

 

Connecting to the Network

Step 1:

Locate the Wireless Network Connection option on your computer and select your Belkin router’s wireless network name.

Step 2:

Click Connect.

 

Step 3:

Enter your Security key or Network password from the network information card and click OK.

Manually creating a network profile

Follow the below steps recommended by Belkin router support professionals.

 

Step 1:

On your computer’s Network and Sharing Center select Manage wireless networks.

 

Step 2:

On the Manage wireless networks page, click Add.

 

Step 3:

You may now enter the information of the wireless network you want to add.  The information entered should match the wireless network’s information.  After filling in the information needed, click Next to add your wireless network.

Adding it using the WPS button

Step 1:

Locate and activate the Wi-Fi Protected Setup™ Push Button Connection (WPS PBC) on the computer you wish to add to your network.  Refer to your computer’s user manual if you need help locating the WPS PBC.

 

Step 2:

Within two (2) minutes of activating the WPS PBC on your computer, press the WPS button below the green status light on the front panel of your router.

 

Step 3:

Repeat this process for each WPS-enabled computer you’d like to add to your network.

 

In case the above step does not give desired output, you can contact Belkin router support company on toll free number at 1-888-479-2017.

Leave a Reply

18884792017