So here we are with another help article by Netgear tech support professionals. In this blog they will explain you the ways to switch off and on with the Wi-Fi On/Off button on Nighthawk router. Please read the below instructions carefully and follow the same.
Steps to get the desired output
The router has internal wireless radios that broadcast signals in the 2.4 GHz and 5GHz range. By default, they are on so that you can connect wirelessly to the router. When the wireless radios are off, you can still use an Ethernet cable for a LAN connection to the router.
You can turn the wireless radios on and off with the WiFi On/Off button on the router, or you can log in to the router and enable or disable the wireless radios. If you are close to the router, it might be easier to press the WiFi On/Off button. If you are away from the router or have already logged in, it might be easier to enable or disable them through the user interface software.
To turn the wireless radios off and on with the WiFi On/Off button:
Press the WiFi On/Off button on the top of the router for two seconds.
If you turned off the wireless radios, the WiFi On/Off LED and the WPS LED turn off.
If you turned on the wireless radios, the WiFi On/Off LED and the WPS LED illuminate.
For any query or doubts, kindly call on Netgear Tech Support. Call on Netgear Tech Support toll-free number at 1-888-479-2017.