Steps to Reconnect the Router after the Belkin Router Firmware Update?

PREMIUM TECH SUPPORT COMPANY

Once you are done updating/upgrading the firmware of your Belkin router, wait for three minutes for it to settle. The screen will automatically return to the home page when the upgrade is done. However, if you are not taken to the web-based setup page, powercycle the router. Don’t know how to do it? Read the below article by Belkin router support.

 

In our last post we have explained how to update/upgrade the downloaded Belkin router firmware. The steps must have helped now. Now in this post we will tell you the further steps.

In the below article our experts share the steps to reconnect the router after the firmware is updated/upgraded.

 

How to reconnect the Belkin router after firmware upgrade?

Sometimes if things don’t work as desired, you should reboot the router, especially if the problem is with your connection. Follow the below steps by Belkin router support professionals carefully.

 

Step 1:

Unplug the power cord from the outlet of your router and wait for 30 seconds.

Step 2:

Plug the power cord of your router back in and wait for all the lights to activate.

You should have successfully restarted your router now. It will now work as desired.

In case, even after following the above steps if you are facing any technical issue, contact Belkin router support expert at Icognix on toll free number 1-888-479-2017.

 

The experts can also be reached through their email address or via web chat. Contact now for affordable assistance.

 

Leave a Reply

18884792017