How to setup static routing between a router and another network?

PREMIUM TECH SUPPORT COMPANY

Before we start with the process, let us first understand what does static routing means.

Static Routing is an unconventional feature on Linksys routers that allows a user to take complete control/access of the routing capability of the router.

static_routes_1

In this article Linksys router support experts explain you the steps to setup static routing between a router and another network seamlessly.

 

  • Step 1: Access the web-based setup page of your router.
  • Step 2: On the Setup page, click Advanced Routing sub-tab.
  • Step 3: On the NAT section, select Disabled.
  • Step 4: Select Disabled for Dynamic Routing.
  • Step 5: Under Static Routing, enter the correct values according to the network information of your network devices:
  1. Route Entries
  2. Enter Route Name
  3. Destination LAN IP
  4. Subnet Mask
  5. Gateway
  6. Interface


*QUICK TIP: Make sure to enter the correct information on the fields below based on each item’s function, otherwise, you will get “Invalid Static Route” error message.

  • Step 6: Click the Show Routing Table button to view the Static Routes you have already set up.
  • Step 7: Click Save Settings.

 

Now that the step up is done, you can PING IP addresses of computers in the remote network to test if the Static Router is working.
In case if you have any issues with regards to the above steps, immediately call on Linksys router support toll free number at 1-888-479-2017. The Linksys router support professionals are available 24×7 for assistance. Contact today for help!

Leave a Reply

18884792017