Everything you want to know about TP-Link Router Speed

 

TP-Link routers are said to be one of the best routers in the sphere. It is known for its great speed and performance. A lot of users prefer TP-Link over other brands or providers due to its attractively priced routers, efficiency and TP-Link router support service. In this article we have listed down the topics and discussions related to TP-Link router speed.

 

What is the difference between 150mbps and 300mbps TP-Link router?

In simple and plain words it means the maximum wireless links speed a router can offer to its users. It does not means the internet speed, but the internal WLAN connection speed between the computer (PC) and the router.  

 

How to determine the actual speed of TP-Link router?

To know the actual speed of the router you can try one of the many available online testing tools. Out of the several choices, there is one tool which is famous among most users – http://speedtest.net  While recognized globally, the results from this tool is flash based and not so exact. For relatively accurate test result, you can choose HTML5 speed test like – speedof.me. One can also contact TP-Link router support professionals to know the actual speed.

 

We get only 1.2 downloading speed despite of 300 mbps speed listed on the TP-Link router. Why?

As mentioned in the first answer, 300mbps refers to the WLAN internal link speed between the router and the PC. This is different from the actual internet speed. The speed of your internet depends on your ISP.

 

Why do we get 1 Mbytes/download speed while our ISP provide 8M network?

Typically, BM means 8Mbps or megabits per second while MBps means Megabytes per second. There are 8 bits per Byte. It is very crucial to clarify whether it is Mb or MB since both of them differs by a factor of 8.

 

The link speed of PC shows shows 54Mbps when the router says it is 300 Mbps capable

Various wireless clients negotiate different link speed with the wireless router, depending on the wireless modes, distance and noise level. In order to get IEEE 802.11n speed, both the wireless router and wireless client have to support 11n mode. If any of the wireless router or the wireless client can support only 11a or 11g, the link rate would be a maximum of 54 Mbps.

 

We tried to answer every query related to TP Link router speed. Still, if you have more, kindly contact TP Link router support experts on toll free number at 1-888-479-2017 for assistance. The professionals are available 24×7 for help and support. They can be contacted via web chat, email or by calling on toll free support number directly. Experts are trained and experienced to handle all user queries with ease and at the earliest. However, you need to choose the mode of communication depending on the nature and priority/urgency level of your issue. If you are facing any problem with your TP link router or have any technical questions, wait no more. Dial 1-888-479-2017 immediately.

What to do when you see black screen when using Chromecast device?

If you see a black screen on Chromecast or you are not getting any signal when you are attempting to set up or use Chromecast device, Chromecast support experts suggest you to follow the below troubleshooting steps:

Black Screen on Chromecast

Black Screen on Chromecast

Firstly try with basic troubleshooting steps, and then go for advanced methods (if need be):

  • Ensure the Chromecast is plugged using the power cord and power adapter that came with the Chromecast. It is essential for the Chromecast to be plugged in straight to a wall outlet
  • If the Chromecast device is correctly plugged in, you should see the LED light on the side of the Chromecast up
  • Users must make sure that their TV is switched to the same HDMI input as the Chromecast. Typically, on several remotes, this is done by the input, Source, or Menu button. You may have to go through a few inputs before finding the right one (Eg: HDMI1, HDMI2, and others)
  • Despite following the above steps, if you still see a black screen, immediately reboot your Chromecast. How to Reboot?
  • Unplug the power cord from the Chromecast device. Keep it unplugged for ~1 before you replugin the power cord
  • It is important to note that unplugging the Chromecast from the TV’s HDMI port does not reboot the device. It must be completely disconnected from the power source for it to reboot

 

Even after doing what is mentioned above, if your TV screen still appears black, choose from below conditions that best matches your situation.

Black screen on Chromecast

 

  • Black Screen + White (solid or blinking) LED light

 

You should try doing the following:

  • Switch off your TV
  • Use the HDMI extender provided with the Chromecast in a new HDMI port on the TV
  • Test the Chromecast of another TV, if need be or if available

Are you still struggling with the same issue? Let Chromecast support team Icognix help you overcome this issue. Call us on toll free number at 1-888-479-2017 for professional support.

 

 

  • Black Screen + Red/Orange (solid) LED light

 

If your experiencing this screen, do the following immediately:

 

  • Plug the power cord that came with the Chromecast into a wall outlet and verify that the power cord and power adapter have a secure connection

 

  • Switch off your TV
  • Perform a Factory Data Reset (FDR)

 

 

  • Black Screen + Red/Orange ( blinking) LED light

 

If you are facing this type of issue, it is good to immediately do the following:

  • Power off your TV
  • Use the HDMI extended that comes with the Chromecast in a new HDMI port on the TV
  • Test the Chromecast on another HDMI TV

 

 

  • Black Screen + No LED light

 

Is this your problem? See the below recommended steps by Chromecast support team:

  • Make sure the outlet/USB port is functional for other devices (for example: try plugging in your phone to the outlet or USB and see if it charges)
  • Try powering the Chromecast from another power source (ie. wall outlet)
  • Try a different power cord (USB-to-micro-USB cable and adapter) than the one that came in the box with the Chromecast device

If none of the above steps are helping to get rid of your issue, kindly contact Chromecast tech support team on toll free number at 1-888-479-2017. You can also write to them explaining your issue in brief. Their experts will get in touch with you shortly.

Tagged with:

Where to place your router for the best wifi router signal strength?

We live in the era of leaks and hacks. While most of us take good measures to secure our property, data and identity online, protecting the Wifi router still lies at the bottom in our priority list. Wifi routers and network are always at the risk of being hacked. Safeguarding your Wifi network is as important as your main door, you don’t know when and who is at the verge of invading your privacy, of course without your permission.

Keep in mind “5 Things to do after connecting with you new Netgear Router

Netgear tech support

So what do you do? Follow the below tips by Netgear support professionals to prevent your Wifi router from getting hacked.

  • Change your router admin username and password – Every router comes with a generic username and password. You need the default username and password first time to access the router. Once logged in, immediately change them. However, make sure your new password is strong and odd enough to guess. Do not keep a predictable one; keep it as tricky as possible.
  • Change the network name – The service set identifier (SSID) is the name that’s broadcast from your Wifi to the outside world so people can find the network. Give your network a more personalized name.
  • Switch off “Admin via Wireless” option on your router – When you disable the “admin via wireless” feature on your router it makes it so that only someone who is physically connected to your router via an Ethernet cable can access the admin features of your wireless router.
  • Use an encrypted personal VPN service at the router level – Earlier using VPN was a luxury, which only big organizations could use. But now even you can use it at a nominal monthly fee; Netgear tech support recommends using personal VPN. Having a personal VPN is the biggest hindrance for a hacker. A personal VPN has the capability to hide your true location with a proxied IP address and can also put up a wall of strong encryption to safeguard your network traffic.
  • Shut down risky services – Any service that’s not used should be disabled immediately; it should never be exposed to the internet. There are certain risky services like Universal Plug and Play (UPnP),Telnet and SSH (Secure Shell) that should be disabled instantly.
  • Update your router’s firmware – Similar to your browser, Operating System (OS) and software, even router’s firmware needs to be updated. The updated firmware may also come with new features for the router, so it’s a win-win.Go into your router settings every month or so and do a quick check to see if you need an update, then run their upgrade.
  • Disable DHCP –  Disable DHCP entirely for security reasons.You have to go into each device—even the appliances and watches—and assign it an IP address that fits with your router.

No expert tips can guarantee 100% security, however the above tips can make it very tough for the hackers to steal your data. As they say, prevention is better than cure. In case of any query or concerned about the security of your private and confidential data, please get in touch with Netgear technical support experts on toll free number at Netgear Support Phone Number 1-888-479-2017 immediately.

Tagged with: , , , ,

5 Things to do after connecting with your a new router

Generally, users don’t replace their routers daily; it is done once in several months or even years. Moreover, there are many important settings that you need do, you might miss out on few of the set up steps. In this article, Netgear technical support team has listed down the top five things you should do immediately after starting your new router.

It takes some time to open and configure the new router. But, a Wifi router if left incompletely or inappropriately configured and with poor security, can leave your network unsettled and unguarded towards malicious users. The below guide will help you safeguard your router from malicious risk and provide proper configuration and performance.

Please note, while we have mentioned complete procedure, every router is different and we’ve mentioned all general points. It is advised you kindly refer the manual or documentation of your specific router to find all the settings correctly and completely. Take a look below:

 

  • PASSWORD – A new router generally comes with a default login id (username) and password that can be used to manage the router. These default passwords aren’t even well kept secrets – one can easily find out the password of your router model with a simple Google search. In fact there are several websites where you can search for passwords just by entering the model and other basic information. Typically, the default passwords are as simple as ‘admin/admin123.’ So if you don’t want your security to be breached, Netgear tech support recommend changing the default login password immediately after you plug in your router the first time.
  • WiFi NETWORK NAMEThe WiFi network name can reveal a lot about your router. Therefore, change it to something different from default – without entering any details that can be easily identifiable. It can be something unusual but of course should be simple to remember.
  • WPS and UPnPBoth these services are designed to simplify your life, but at the same time there are several security breaches to it. Check your router’s settings carefully to disable both WPS and UPnP.
  • FIRMWAREWhile firmware are created to be stable, there are two most important reasons to look for updates immediately after buying a new router. Primarily, your router may have been made long back, and in the meantime a new update may have been released. Secondly, there are vulnerabilities that crop up in router firmware, so it’s always good to have the latest (and most secure) firmware available.
  • REMOTE ACCESSHaving a remote access on your router opens up a huge chance of risk/vulnerability that attackers can take advantage of. Usually, manufacturers these days are taking default security seriously, so you might get the remote access option disabled by default.

 

In case of any query related to the points mentioned above or you are unable to do any of the above step, please contact Netgear technical support  on toll free number at 1-888-479-2017 immediately. The experts can be contacted 24×7 via web chat, email support or calling on toll free contact number.

Tagged with: , , ,

Manually setting the wireless network of your Linksys dual-band router

A wireless network is a type of computer network that uses wireless data connections for connecting network nodes. Wireless networks are generally implemented and administered using radio communication. Linksys Dual-Band routers provide you with an option to set up your wireless network using either the 2.4 GHz or 5 GHz frequency bands or both. If you want to connect to a 5 GHz network then you can check your laptop’s documentation if its wireless adapter is capable of connecting to a 5 GHz wireless network or not.

This Linksys Tech Support article will guide you to manually set the wireless network of your Linksys Dual-Band router:

Follow these steps:

  1. Firstly, access the router’s web-based setup page.
  2. Click on the Wireless tab.
  3. Under the Basic Wireless Settings option, select the Manual box.
  4. Now, select a Wireless Band (select either the 2.4 GHz or 5 GHz band) and a Network Mode.
  5. For the Linksys Wi-Fi routers, you may enable either the 2.4 GHz or 5 GHz band, or both by setting the Network Mode to your desired standard (i.e. mixed, Wireless-N only, etc.).
  6. Enter a Network Name (SSID).
  7. For Network Mode select Mixed or Wireless-N only, and then select Auto on the Channel Width option. Channel Width is automatically set to 20 MHz only.
  8. Select a Wireless Channel from the drop-down list.
  9. Set the SSID Broadcast to Enabled to broadcast your 2.4 and 5 GHz networks.
  10. Click on Save Settings to apply changes.

Linksys Tech Support wants to inform you that you can also change your wireless network’s name and password using the Linksys Connect Software.

If you have any questions or are facing any issues, please contact to Linksys Tech Support. Call on Linksys Tech Support toll-free number at 1-888-479-2017.

Troubleshooting LAN Connectivity Problems on my Netgear ProSAFE or Nighthawk Switch

LAN connectivity problems on a switch can be caused by any of a wide range of factors. Below are some simple things to check which can help to resolve common problems.

In this article Netgear Nighthawk support professionals list down the steps to troubleshoot LAN connectivity problems on Netgear ProSAFE or Nighthawk Switch.

  1. Power cycle the switch and other network equipment.
  2. Ensure that the firmware on the switch and other network equipment is up to date. Firmware updates addressing bugs and other issues are regularly released. For NETGEAR equipment, enter your model number at https://www.netgear.com/support and go to Firmware and Software Downloads to find the latest firmware. Note: This does not apply to unmanaged switches.
  3. Reset the switch to factory default settings. This is helpful to erase any undesirable configuration which may be causing problems. Where necessary, be prepared to re-configure any required settings on the switch such as VLANs.

Now let’s understand the steps the upgrade FS526Tv2/FS728TLP Firmware Version 1.0.1.21 by Netgear Nighthawk Technical Support experts.

  1. Download the new firmware 1.0.1.21 from NETGEAR product support Website and store it in local PC, and remember its location in the PC’s file system. Then unzip it to get the switch image of .rom format.
  2. There are three methods to upgrade the new firmware from PC to the switch.
    • HTTP
    • TFTP
    • SCC (Smart Control Center)
    • Below are the steps to upgrade the firmware via HTTP, which is the most convenient method. For the other methods, please check the IG and SW User Manual for details.
  3. To use HTTP method, go to GUI page “Maintenance > File Management > Dual Image > Dual Image Status”, find the backup (next-active) image.
  4. Suppose the backup-image is image1, then go to “Maintenance > Download > HTTP File Download”, set File Type as ‘Code’, set Image Name as ‘Image1’, select the firmware file of .rom format stored in local PC via Browser button, then click Apply button to start firmware downloading
  5. Go to GUI page “Maintenance > File Management > Dual Image > Dual Image Status”, to double check the latest image is correctly downloaded to image1 and image1 is the ‘next-active’ image. If not, go back to step 3 to download the switch image again.
  6. Go to GUI page ‘Maintenance > Reset > Device Reboot’, check the checkbox then click Apply button. The restart may take several minutes, do not power cycle or reboot the switch before the process is complete.
  7. After the switch is restarted, login the switch to double check whether the FW is upgraded correctly, via GUI page of “GUI page System > Management > System Information”.

If you have any questions or facing any technical problem, contact Netgear tech support on toll free number at 1-888-479-2017. The experts can be reached via web chat and email support also. So you can pick support from three convenient options.

Steps to Set Up FlexPower Wire-Free IP System – A Complete Guide

In this article we list down the steps to setup FlexPower or configure wire-free IP system. In case if, despite following the below steps you are unable to get the desired output or set up FlexPower  Wire-Free IP System, contact Netgear technical support number on 1-888-479-2017. The team is available for assistance 24×7 for any technical help.

 

Follow these high-level steps to set up your FlexPower system:

  1. Set up the base station.
  2. Set up the FlexPower camera.
  3. Sync the FlexPower cameras with the base station.

To set up the base station:

  1. Use an Ethernet cable to connect the base station to a router or switch.
  2. Connect the power cord that came in the package to the base station and plug it in to an electrical outlet.
  3. Press the Power button on the back of the base station.
  4. After the base station powers on, the Power LED and the Network LED light solid green.

To set up the FlexPower camera:

  1. Unlock the battery compartment by pressing and holding the latch.
  2. Gently pull the battery door back and open the compartment.
  3. Align the battery contacts.
  4. Insert the battery.
  5. Close the battery door.

To sync your FlexPower camera with the base station:

  1. Press the Sync button on top of the camera for about two seconds.
  2. The camera LED blinks blue. When the camera is synced to the base station, the camera LED blinks rapidly to confirm sync.
  3. Note: The camera LED blinks amber if the sync is not successful. You must repeat the sync process.
  4. Press the Sync button on the front of the base station for about two seconds.
  5. The base station camera LED blinks green.
  6. Bring the camera within 2 to 4 feet of the base station.

There are many users who don’t know what the LED on FlexPower Wire-Free IP Camera mean. Here is the meaning for your understanding by Netgear technical support professionals. The FlexPower Wire-Free IP camera has three camera states –  general, syncing, and charging.

General

  • Blinks blue once. The camera is powered on.
  • Blinking blue and amber. A firmware update is in progress. Do not turn off the camera.
  • Off. The camera is powered off or is powered on and is synced to a base station.

Syncing

  • Slow blinking blue. The camera is attempting to sync to a base station.
  • Fast blinking blue. The camera is syncing with a base station.
  • Fast blinking amber. The camera did not sync.

Charging

  • Fast blinking blue. The camera is connected to power and is charging.
  • Solid blue. The camera is powered on and the battery is fully charged.
  • Slow blinking amber. The camera battery charge is low.
  • Fast blinking amber. The power connection failed.

For any queries or additional assistance, don’t forget to get in touch with Netgear technical support professionals on toll free number at 1-888-479-2017. The experts can resolve your issue by providing customized support/solution at a much pocket friendly price. The professionals can be contacted via web chat support, email support or through the fastest medium calling on toll free number.

Tagged with: , , , ,

Important facts to remember about the Bad Rabbit Ransomware

The previous string of ransomware attacks wreaked havoc on governmental and personalized computer systems on a global level. This time, the level of attack has increased multiple times with media organizations in Russia and Eastern Europe being the next target. The new ransomware has been known as the Bad Rabbit Ransomware and has created a panic same as the last attacks of similar ransomware attacks.

However, in order to curb the affect and know how to tackle this issue; the experts have come up with 10 things that are known about this ransomware attack. Kindly pay attention to these pointers mentioned below;

Russia and Eastern Europe are the first target

Larger attacks have occurred over Russian and Ukraine computer systems and a small part of Germany and Turkey. Antivirus researchers have claimed that its impact has also been felt in Poland and South Korea. The Russian internet security company named Group-IB has confirmed about three media organizations being hit by the virus. At present, the number of targets is estimated to be 200, but it is still going unchecked.

It’s 100% Ransomware

Victims of the Bad Rabbit Ransomware attack realized that it is same as the previous ransomware attacks. The Bad Rabbit also presents the users with a ransom note that says the files are no longer accessible and cannot be recovered without using the attacker’s decryption service. Those affected are guided to a payment page and given a countdown timer of around 40 hours after which the ransom amount increases. The encryption required uses a DiskCryptor, an open source legitimate required for full encryption and the unlock key is generated using CryptGenRandom.

Spreads mostly via fake update or compromised webpage

The main tactics used by Bad Rabbit Ransomware includes drive-by downloads using hacked websites. No exploits are used and visitors are driven to infected websites and told to install a Flash update. Needless to say, there is no Flash update but a harmful application install. Infected websites have been used mostly in Russia, Turkey and Bulgaria. The security on these sites are compromised using a JavaScript and injecting the HTML body in its .JS files.

No EternalBlue

When the Bad Rabbit made its appearance, it was speculated that like WannaCry, it will also use the EternalBlue exploit to do maximum damage. However, this does not appears to be the case this time as there is no evidence about the EternalBlue being used to spread the infection.

No identification of the attacker

Presently, it is still not known as to who is responsible for this attack. The previous Petya attacks has led experts to believe that the same group created the Bad Rabbit issue. As of present, the attacks on Russian computers has also removed the speculation that a Russian group could be responsible for the attack.

Game of Thrones references

The unidentified individual or group of individuals behind this attack seem to be fans of the Game of Thrones television series. The code contains reference to the dragons of the series namely Viserion, Drogon and Rhaegal.

It resembles Petya

The ransom note appearing with Bad Rabbit seems eerily familiar to the Petya ransomware attacks. Bad Rabbit also shares the same elements as were found in Petya. Various virus detection analysts have found that both Bad Rabbit as well as NotPetya DLL files a massive 67% of the same code.

Bad Rabbit can easily spread across networks

Bad Rabbit has an SMB component that allows it to damage maximum computers by spreading through infected networks. A simple username and password combination is enough to execute a brute-force attack across the entire network.

Indiscriminate Attacks

Bad Rabbit does not discriminate when infecting computers, it has been designed to hit specific targets. Experts suggest that a majority of attacks are targeted at corporate networks. It has also been speculated that the instructions in the script injected inside the infected website can determine whether the visitor is suitable for attack. However, the reason for the attack on media organizations in Russia an Ukraine cannot be determined at present.

How can I stay protected against Bad Rabbit attack?

At present, there is no confirmation whether the encrypted files can be decrypted by paying the said ransom. Experts suggest not to pay the fee as it will only encourage further attacks on others.
A number of antivirus and data protection companies have offered products to handle the issue of Bad Rabbit Ransomware. However, if you want to be sure about not falling prey to this attack then make sure that you block the extension of the following file to prevent the infection.
“C: \ windows \ infpub.dat, C: \ Windows \ cscc.dat”.

Tagged with:

ReadyNAS OS 6.8: Multiple Admin Support

Wondering what ReadyNAS OS 6.8 do? It allows admins to configure users to the admin group. This group allows members  to login to the Admin Page, and manage the device, all without using the admin user’s credentials.

In the below article, Netgear tech support professionals explains the adding, changing, and creating user as a primary and secondary member of the admin group.

Adding an existing user as a Secondary Member of the admin group

  1. From the Admin Page, click Accounts > Groups.
  2. Click on the admin group, then click Settings.
  3. Check the box on any user you would like to add to the admin group, then click Apply.

Changing a user’s existing Primary group to admin

  1. From the Admin Page, click Accounts > Users.
  2. Click on a user you want to edit, then click Settings.
  3. Click the Groups tab, then change the Primary Group to admin, then click Apply.

Creating a new user with Primary admin group

  1. From the Admin Page, click Accounts > Users.
  2. Click New User. A dialog window appears.
  3. Enter all new user details on the Properties tab, then click the Groups tab.
  4. Change the Primary Group to admin, then click Apply.

ReadyNAS OS 6.8: macOS SMB Enhancements

ReadyNAS OS 6.8 offers an enhanced SMB experience for macOS users.  These enhancements resolve complaints regarding slow loading of directories with a large amount of files over SMB.

Enabling macOS SMB Enhancements

  1. From the Admin Page, click System > Settings.
  2. Under Services, click SMB. A dialog windows appears.
  3. Check the box on Enhance MacOS, then click Apply. This change takes place immediately.

Disabling macOS SMB Enhancements

  1. From the Admin Page, click System > Settings.
  2. Under Services, click SMB. A dialog windows appears.
  3. Uncheck the box on Enhance MacOS, then click Apply. This change takes place immediately.

Call on Netgear tech support toll free number 1-888-479-2017 for any assistance during the process. Call today for help!

 

Tagged with: , , ,

How to Add, Edit and Delete ReadyNAS OS 6.8: HTTP/S Proxy

This article by Netgear technical support describes about the ReadyNAS OS 6.8 HTTP/s proxy. ReadyNAS OS 6.8 now supports HTTP/s proxy. Proxy allows ReadyNAS in networks restricted by an HTTP or HTTPS proxy to access the internet for functions such as firmware updates, antivirus updates, App downloads, and more.

Enabling an incorrect proxy server will prevent your ReadyNAS from communicating to the internet properly. In the following article Netgear technical support explains the steps to add, edit and delete a proxy.

Add a Proxy

  1. From the Admin Page, click Network > Advanced.
  2. Under Proxy, click the Plus button. A dialog window appears.
  3. Under Type, select your Proxy type (HTTP or HTTPS).
  4. In the Address text box, enter the proxy server’s IP address.
  5. In the Port text box, enter the proxy server’s port number.
  6. If your HTTP or HTTPS proxy server requires authentication, enter the User Name and Password in the applicable fields.
  7. Optionally, click Test Connection to confirm if the proxy is configured correctly.
  8. After configuration, click Add.

Edit a Proxy

  1. From the Admin Page, click Network > Advanced.
  2. Click the Proxy that you want to edit, then click the Settings gear.
  3. Modify the settings, then click Apply to save your settings.

Delete a Proxy

  1. From the Admin Page, click Network > Advanced.
  2. Click the Proxy that you want to delete, then click the Minus button.
  3. A dialog will appear asking for your confirmation. Click Yes to confirm or No to cancel.

In case of any query, contact Netgear router technical support professionals on toll free number at 1-888-479-2017. They can be reached via phone call, web chat or email support. The experts are available 24×7 for your assistance. However, the fastest way to reach and get the response is through phone call (by calling on Netgear technical support toll free number).

If you are experiencing any issue with the ReadyNAS OS 6 like Unrecognized server error in Chrome 60, follow the below steps.

 

Users running Google Chrome version 60 or newer may experience an “Unrecognized server error” when updating the firmware from the ReadyNAS OS 6 Admin Page.

  • The error is observed in ReadyNAS OS 6.7.5 and earlier.
  • This issue is resolved in ReadyNAS OS 6.8.
  • The error can be ignored by clicking Cancel.
  • There is no adverse effect on the Admin Page.

 

Tagged with: , ,
Top