Belkin Support +1 888 808 1303 | Belkin Customer Service

Belkin Support By Professionals

Icognix support team is one of the most efficient providers of Belkin Support specifically for Belkin networking products. Belkin products come with stylish looks at a very steep price & our professionals make sure that they give outperformance for your network just the way they look.

Belkin modem router has a reasonable feature set for its price but how well does it perform? to know more about the reliability of Belkin products you will have to read their customer review forums. You will hardly find any customers complaining about their product not working properly.

Our Belkin Customer Support Service department is open 24/7. Belkin routers if not well set up they give out a lot of issues including their wireless connectivity. Dropouts, malfunctioning of antennas and all other hardware issues occur if their software is not well set up.

To get rid of all these problems make sure you check with your professionals providing support for bilking routers, modems and all of its networking products. Have questions? Find the answers you need via our comprehensive FAQs and user guides on our icognix.net site. Need additional assistance? Contact our Belkin customer Service team for Belkin routers.

The number one rule followed by our experts working at our Belkin Support for Belkin routers is providing quality solutions for any router related issue to the customer. We do not provide customers with temporary solutions nor keep them waiting for any issue they might face with their internet router’s functioning.

Why you Need Belkin Router Support?

Get solutions for driving down operating costs and creating more efficient ways of working on Belkin owned networking products. Contact Belkin Support specialised for Belkin routers. We can help you reduce costs on different parallels. Our team will provide you with flexible solutions & increase the efficiency of wireless networks of Belkin products to make sure you can connect a number of wireless products hassle-free to your Belkin network.

Reduced downtime is like a cherry on the cake. We are a third party Beklin technical support provider of Belkin router that provides instant guidance in case of any technical trouble related to your Belkin router. We have the most proficient, experienced and skilled technicians who expertise in handling all kinds of technical glitches related to your Belkin router within a short frame of time.

So whenever any kind of issue arises with your Belkin router or disturbs your home or office networks and provides inconvenience in your web browsing then instead of getting disappointed, seek the instant support from our experts at Belkin Help Number.

If you do not wish to call, you can directly chat with our executives and get instant solutions via Icognix’s Belkin Chat support.

Belkin Router is a widely famous router as it provides a secure routing experience. If you are a first user of the Belkin router then you might face problems configuring it. Simultaneously it is essential to configure and set login details of the Belkin router to secure the wireless network. Configuring a Belkin router is not a tough task.

If you have a somewhat knowledge of networking and technicalities then you can fix by performing the steps available on google manually. However, it is common that some users don’t have any technical knowledge, for them fixing this issue might be difficult. But you don’t have to worry our Belkin technical support team specialised in Belkin routers is always here to help you out for Belkin router issues.

What Makes Belkin router The Best?

Belkin is one of the most trusted brands worldwide for networking products. We have hired a highly trained technical team specially for Belkin customer support that provides simple steps and solutions to solve your router issues. We know people are tied up in a very busy schedule and they don’t have time to call or go to the local technicians near their area.

That’s when our Belkin Support US for Belkin Routers came into the picture to provide them with better support sitting at home right in front of their eyes. Because of our support, there is a good response to the after-service market for Belkin routers. That’s one of the big unique selling points for Belkin routers which makes it the best in the market.

Icognix tech support specified in Belkin routers helps you for free right from the beginning of the router purchase. We will guide you the method for How to Login into Belkin Wireless Router when you first get the router home and try to switch it on.

Login is a kind of authentication check which is helpful to save the device from intruders. Router login details must always need to be kept very confidential because sharing with login details may cause misuse of Wireless network, private IPs or of domain network if you have created any.

Here you will find the complete method regarding the Belkin Wireless Router login if you still find any difficulty and then you can contact Belkin Wireless Router Support through our Belkin toll-free number.

Belkin wireless router is easy to set up within very less time if you have some knowledge of the technicalities. It provides the high-speed internet and through which you can easily surf on the web, watch movies and use social media.

The producers of the Belkin router claim that there is no other faster router than their production.

When To Contact Belkin Customer Service Team?

Belkin router is a reliable and effective device through which you can connect your laptop, computer, mobile phones, iPads, iPhones etc. Belkin router performs excellently for the daily internet users. But sometimes the router may stop working because of some technicalities.

We have found that most users don’t have time to call or can’t get in touch with us because of the busy schedule or sometimes they feel hesitated. This is the exact time when you will need out tech support for Belkin routers to complete your process.

Become the part of the Belkin family and get the solution regarding any of the occurred issues of Belkin. You can access the support team of Belkin through our Belkin customer service team.

In order to connect with us, you have to visit our website and there you will come across with the pop-up message of “Leave a message” on the left side. You just need to feel your complete information and soon our team of experts will connect with you.

How do I contact Belkin Customer Support?

A wireless router is an electronic device that works similarly as a wired router. The Belkin wireless router has access points whereas the Belkin wired router uses internet cables like LAN cables, Serial cable or if you want to connect Belkin wireless router for setting up then you can use a console cable to configure the router through the computer system. The configuration of the wireless router becomes so easy if we get the best Belkin Customer Support from our experienced technical expert

Belkin router is the best connectivity device. For the past 30 years, Belkin has been serving its customers with high internet speed. It provides extensive range through which you can connect your iPads, iPhones, laptops etc at the same time.

By using the Belkin router you can have access over the internet at both home and office. However several times a user doesn’t know How to Update Belkin Router Firmware? And for the proper connectivity, it is quite necessary that your router has the updated firmware. Therefore we bring for the easy steps to update it. Call our team to give you the best possible tech support for routers we have.

The very first thing you must know the definition of firmware and why you should update your router very often because that’s something which protects your home privacy of personal data.

As we all know that electronic devices can bring serious problems in our life. It can be easily hacked, your personal and informative data can be lost, brute attacks can happen & a lot of other things. Therefore to minimise the drawbacks in terms of firmware Belkin releases security updates which fix all the issues and security problems.

If you want to know how to update and upgrade your firmware of the Belkin router then contact Belkin team for best possible results.

Best ways to contact the Belkin Customer Support service

1.Through Live Belkin Chat Support

On our website, there are many continents that will help you to solve your Belkin router. Our provided steps and solutions will help you understand the problem you might have with your product. For any reason, if you don’t feel dialling Belkin support number then you can avail our services of Belkin router chat support. Go to our website and click on the Live Chat Section and you will directly connect to our Belkin team of experts.

A technical issue in Belkin products

Belkin Router is an electronic device which deals with connectivity. It is known as the most important gadget that has gained huge popularity among the masses. Making good use of wireless technology, Belkin router is used among people due to its reliability and durability.

Like any other gadget, the Belkin Router is also prone to technical issues but do not worry about such problems. To combat tech issues, simply contact Belkin Support. You will get complete assistance for Belkin Routers with 100% satisfaction. If you have lost the internet access from your Belkin router or are unable to go online, then troubleshoot this problem with the help of our Belkin router support and fix this issue quickly.

Following are the technical issues that can bother anytime for your Belkin Router:

Poor Wi-Fi reception range
Lights on the router are not blinking
Router’s drivers have become outdated
Issues with current internet surfing speed
Unable to configure the router’s admin settings
The router is not able to create an internet connection
Some other issue related to the router’s performance
Unable to form up a wireless network connection at all
The router is facing issue in connecting some device to the network

Belkin router is a team composed of highly experienced technical executives who render full customer support satisfaction. They assist customers in obtaining Belkin Router firmware update, Belkin Router admin password updating, identification of the model, and the version number of Belkin Router, troubleshooting, and many more services.

At Belkin Contact Phone, you will get a chance to connect with one of our team members who are well versed and trained as well. You can easily sort out all the glitches that you are facing on a single call. We are freely available on 24*7 bases over the globe. Despite at what time and from where you need the assistance, we are here for you!

How to setup Belkin router n150?

The Belkin n150 wireless router is the fastest n150 router at long range versus other leading brands. The Belkin n150 wireless router is ideal for surfing the web, emailing, and instant messaging and is easy to set up, allowing you to get your secure wireless network up and running in minutes.

Fully compatible with g technology, the Belkin n150 delivers speeds of up to 150mbps* and features exclusive multi-beam technology for powerful signal strength and maximum coverage—so you can connect from virtually anywhere in your home/office. The standard transmission rates—150mbps, 54mbps, and 11mbps—are the physical data rates.

*Where to Place Your Router

For the best results, place the Router next to your modem in an open location, away from large metal objects and magnets such as those found in speakers. Raising the Router above floor level can improve the strength of your wireless signal.

Steps:

Connect Your N150 Router Turn off your modem by disconnecting its power supply. Some modems have a battery backup; this will need to be disconnected at this time as well.
Connect your Router to your modem using the cable (already attached). Power up your modem by plugging in its power supply. If your modem has a battery backup, it can be reconnected at this time; you may need to hold the reset button for 10 seconds. Power up your Router by plugging in its power supply.
Connect to Your Router The default network ID and password information for your router can be found on the product label on the bottom of the Router.
Use your computer, tablet, or smartphone to connect to the wireless network shown on the router product label.
If the page does not load, then try visiting http://192.168.2.1 to see the router homepage. Click the “Detect my connection” button in green. (If you would rather set up the Router manually, click the “set it up manually” link.
After several moments, your Router should automatically detect your Internet connection and restart. This can take anywhere from 30 seconds to 3 minutes depending on your connection type.

How to setup Belkin router n300 wifi range extender?

If you are facing a connection issue in your home or office then you must check the reason behind it. Generally, our routers don’t cover the entire home network. They provide wifi signals up to the limited area, beyond that devices get no signals.

Or sometimes router signals get disturbed due to interferences, obstructions present nearby the router, which contributes to weakening the signals. So, in order to eliminate this interference and obstruction, you need a device like Belkin range extender setup. Belkin is a well-known company that manufactures quality networking devices such as routers and extenders.

So, if you are about to invest in the Belkin range extender setup n300, you will not regret your decision.

Belkin range extender setup via WPS

Your Belkin range extender can be set up wirelessly. A wireless installation that totally depends upon WPS or “Wi-Fi Protected Setup, is the simplest method to set up an extender.
First of all, push or hold the WPS button on Belkin range extender setup n300 for about 2 seconds.
Release the WPS button once you see WPS LED light begin to flash. It indicates that WPS has been started.
Next, push/hold the WPS button on the router within 2 minutes, starting WPS on your Belkin.setup wireless range extender.
Concluding configuration will take place automatically.

Belkin Range Extender Setup via Belkin Setup Wizard

To initiate Belkin Setup Wizard, a user will need a Web-enabled device such as a computer or tablet, a device with Web browsing potential. Generally, every Belkin range extender supports wireless Web setup.
Initially, plug your Belkin range extender setup n300 into a power outlet. Extender must be placed within the range of your router’s wireless network.
Next, detect & connect Belkin.setup network by your wifi-enabled device.
Just in case, you can’t view the network, reset your range extender.
Open a web browser now and type domain name http://belkin.range into browser address bar & click Go button.
Apart from the domain name, you can also use the IP address http://192.168.206.1 to access Belkin n300 range extender setup page.
On the opening of the next page, tick on the started button. This will look out for the router’s SSID.

HOW TO SETUP BELKIN ROUTER N450?

The Belkin N450 DB Wi-Fi Dual-Band N+ Router is an excellent and budget-friendly wireless router that provides good performance and includes excellent features. The Belkin N450 is one of the top-rated wireless routers because it supports data streams on two frequency bands simultaneously, it is easy to set up and manage.

Turn off your modem by disconnecting its power supply.
Connect your Router to your modem using the cable.
Power up your modem by plugging in its power supply.
Power up your Router by plugging in its power supply.
Insert the included CD into your computer. It should run automatically; if not, find the setup program and open it. Follow the prompts.
The setup software will configure your Internet connection and let you know when things are working. If you have DSL, you may need a username and password from your Internet provider.

How to setup Belkin router n600 range extender?

Belkin range extenders help you to access the high-speed Internet connectivity even at dead zones as they repeat the signal from your existing wireless router.

Belkin range extender picks up the wireless signal from your existing wireless router and extends it to the previously dead areas. Belkin extender comes with a responsive web-based interface which helps the user to set up their Belkin range extender easily and in very less time.

Attach your devices with the cables to make a connection between them.
Connect your Belkin range extender with the computer using an Ethernet cable.
Plug the one end of Ethernet cable into the Belkin range extender and another end into any LAN port of your computer.
Now, plug the power adapter of your Belkin range extender into the power outlet. Make sure you plug the range extender in the area where you previously experienced bad signal strength.
Before you proceed, you should know your range extender’s default IP address. To know the default IP address of your Belkin range extender, look for the wireless card on the back of your range extender. Wireless network name of your Belkin range extender is also written there.
Launch a web browser on your computer that is connected to the range extender.
Enter the default IP address into the address bar and click Go. You can also navigate to Belkin’s official website for Belkin range extender setup n600.
Now you will be directed to Belkin range extender setup n600 page from where you can set up your range extender without any hassle.
Once you enter the setup page, you will see a tab named “Get Started”. Click on Get Started.
Now, select whether you want to configure 2.4 GHz or 5GHz wireless network and click Next.
Now your range extender setup will take you to wireless network settings. These settings include Network Name, Network Key, and Security Type.
Choose a network name according to you and set a strong password for your Belkin range extender.
Now you will be directed to the last page where you will see a tab named “Create extended network”. Click on it and your range extender will be set up.
In case, you are unable to configure your range extender, don’t worry; reset your range extender. Press and hold the reset button for a few seconds and then again follow the above-given instructions to set up your device successfully.

HOW TO SETUP BELKIN ROUTER ac1200?

The Belkin AC 1200 DB Wi-Fi Dual-Band AC+ Gigabit Router offers a new level of reliability, speed and coverage for all your Wi-Fi devices. AC is next-generation Wi-Fi, providing greatly improved coverage and speeds up to 2.8x faster than traditional N routers*. AC Wi-Fi signals travel faster and farther than the current standard and with Belkin’s Simple Start installation is easy and quick – just use a smartphone, tablet or computer to set up your router.

The Belkin AC 1200 also enhances mobile device performance and works seamlessly with Wi-Fi ‘N’ and ‘G’ devices. Get the most out of all your wireless devices and take home networking to the next level with the Belkin AC 1200 DB Wi-Fi Dual-Band AC+ Gigabit Router.

Turn off your modem by disconnecting its power supply. Some modems have a battery backup; this will need to be disconnected at this time as well.
Connect your Router to your modem using the cable (already attached). Power up your modem by plugging in its power supply.
If your modem has a battery backup, it can be reconnected at this time; you may need to hold the reset button for 10 seconds.
Power up your Router by plugging in its power supply.
The default network name and password are also printed on the foot of the Router.
Use your computer, tablet, or smartphone to connect to the wireless network shown on the network ID card.
If the page does not load, then try visiting http://192.168.2.1 to see the router homepage. Click the “Detect my connection” button in green. (If you would rather set up the Router manually, click the “set it up manually” link and proceed to page 10.)
After several moments, your Router should automatically detect your Internet connection and restart. This can take anywhere from 30 seconds to 3 minutes depending on your connection type.
Once your Router is online, it will determine if there is a firmware update available and offer to install it. Please allow up to 5 minutes for the firmware to update.
At the next screen, you will be invited to change your network name and password. Re-using your previous network name (SSID) and password makes connecting your existing devices to the new router much easier.
If you decide to change these settings, then enter the new values and click “Save and Continue.”
Please take this opportunity to register your Router. This will help Belkin customer support if there is a problem with your Router.

How to set up Belkin netcam?

The Belkin NetCam HD+ delivers 720p HD live streaming video to your smartphone or tablet, letting you watch the action in your home from wherever you go. Equipped with a wide-angle glass lens, night vision, and secure Wi-Fi connectivity, the NetCam HD+ ensures you’ll always be a part of what’s happening at home.

Control the camera using the free NetCam App for your smartphone or tablet–no computer required. Installation is a breeze for most wireless devices, and the encrypted Wi-Fi connectivity gives you a secure, worry-free streaming experience. A push-to-talk button and built-in microphone let you communicate with kids, elderly family members, and even pets when you’re out.

Before setting up netcam, you will need
Your wireless router, its network name (SSID), and password.
An Android™ device (Version 2.2 or later) or an iPhone, iPad, or iPod touch (iOS Version 4.1 or later)
Plug the NetCam into a power outlet
Switch the NetCam to Setup Mode by flipping up the switch on the back of the camera
Download the NetCam App from the App Store or Google Play
a) Set Up on iPhone, iPad, iPod or Android phone Connect your mobile device to NetCam Wi-Fi signal.
b) Go to “Settings > Wi-Fi” on your iPhone/iPad/iPod/Android phone touch and connect to the camera’s Wi-Fi signal. Launch the NetCam App Once your device establishes a connection with the camera, launch the NetCam App.
c) You should see a pop-up message like the one below. Click “Yes” to set up your camera. Click “Continue” to begin setup.
d) The camera will show you a preview after successfully connecting to your device. Click “Connect Camera to the Internet.” Choose your Wi-Fi network to connect to the Internet.
e) If you are using Belkin Netcam for the first time setting up your camera, you will need to create an account. flip the setup switch down on the back of the NetCam.
f) Click “Finish” to complete the setup.

HOW TO UPDATE THE RANGE EXTENDER IN BELKIN ROUTER?

Belkin range extender efficiently serves in extending the range of Wi-Fi networks. Still, using the range extender with an older version of firmware can lead to few performance issues. The performance issues can be like dropping internet connectivity, decreased Wi-Fi range, etc.

Thus, to avoid performance issues, it is recommended to always keep the firmware of Belkin extender updated with the most recent one available till that date. Updating the firmware also enhances the features and functionality of Belkin wireless range extenders.

Downloading the firmware

Launch a web browser and access the Belkin Support site.
Enter the model number of your Belkin range extender in the search bar and press [Enter]
Select your device.
On the product support page, click on Downloads / Firmware to open the download article.
Select your hardware version and click on the Download link of your range extender’s firmware.
Select the Save File radio button then click OK.

Updating the range extender

Once you have downloaded the firmware, open a web browser and enter “http://belkin.range/” in the Address bar, then press [Enter]. You can also use 192.168.206.1 to access the range extender’s web-based setup page.
Click Login.
Enter your range extender’s Password then click Submit.

NOTE: If you haven’t set up a password, leave the field blank then click Submit.

Select Firmware Update.
Click Browse… or Choose the File button and select the firmware that you have downloaded, then click Open.
Click Update.
When the prompt appears, click OK.
Another prompt would appear stating that the device will not respond during the update.
Click OK and wait for the firmware update to finish.

(Do NOT unplug, power OFF, or restart the range extender while the firmware is updating.)

BELKIN SETUP WIFI RANGE EXTENDER WIRELESSLY

If your Wi-Fi connection isn’t quite as speedy as the 100 megabytes per second promised by your provider, the culprit can be anything from physical interference to congested data lanes. However, if the internet traffic lanes are clear and your shiny new router is up to snuff, but your devices are just too far away from that downstairs signal source, Belkin offers a solution.

Belkin offers a mercifully painless way to set up your Wi-Fi Range Extender. Whether you’re hooking it up to a wireless or wired internet signal, the installation process directs you to a website that walks you through the process step-by-step

Before you begin, ensure that you have the following:

A Belkin Wi-Fi Range Extender.
An existing Wi-Fi network and its wireless router’s network name (SSID) and the wireless password.
Plugin your range extender into a power outlet that is within the range of your router’s wireless network.
Using your Wi-Fi-capable device, locate and connect to the Belkin. setup network.
Wait for your device to connect to the Belkin. setup network before proceeding to the next step.
Launch a browser and enter “http://belkin.range” in the Address bar then tap Go
On the page that opens, tap on getting Started. It will search for your router’s SSID. It will search for your router’s SSID.
Select the wireless network you want to extend. Tap Next once did.
Wait for the setup to connect to the network
When prompted, enter your wireless network’s password then tap Next.
Wait for the setup to authenticate your password.
If you have a dual-band network, select the second wireless network you want to extend then repeat.
Review the Extended Network information. Tap Edit if the information needs to be changed. Otherwise, tap the Create Extended Network button to proceed with the setup.
Your extender is now configured.

BELKIN ROUTER TECH ISSUE

Belkin router is a popular router that is providing connectivity solutions for electronic users from 30 years. Belkin, with an extensive range of innovative products providing networking solutions and accessories for iPhones and iPods, has become a strong international presence.

If you are a Belkin router user then you establish the most desirable networks both at home and office. However, several times due to any software error, automatic updates or change in the network settings your router may stop working. Just don’t panic because now Belkin Tech Support Expert is here to provide you Belkin Router Tech Support.

No, matter how complex the issue is, Tech Support Expert will help you to fix your software issue with complete customer satisfaction. For any technical assistance, you can call us anytime at our toll-free number +1 888 808 1303 or you can also mail us at info@icognix.net. We have adopted the easy way of communication which help you to have a hassle-free conversation with us.

Most of the users’ lookout on the internet to fix the issue but it is not that easy. Implementing the online solution properly is soo difficult. Therefore our dedicated team is here to resolve every technical glitch that occurs while using the internet from Belkin routers.

1. Not able to connect your device with the Belkin router.

2. Don’t know how to set up Belkin router

3. The password of the Belkin router has skipped from your mind.

4. Not able to access the Belkin router page.

5. The Belkin router is not starting.

6. PC is unable to connect to the Belkin router.

7. Unlawful access of Belkin router.

8. Troubleshoot internet problems.

9. Belkin router problems of firewall configuration

10. The light blinking issue in the router.

11. An error occurred while updating the security on the Belkin router.

If you are in the middle of such issues then with your Belkin router you need to fix them without wasting any time. Contact Belkin router technical team who provides you with the best customer services within time. If you want to run your Belkin router to its complete potential then there is nothing to panic about. Belkin support Service expert is here to help you to get rid of all such router issues.

HOW TO CHANGE PASSWORD IN BELKIN ROUTER?

A Wi-Fi password is necessary if you want to connect your devices wirelessly to the Wi-Fi and limit the number of users that can connect to your Wi-Fi. This article will help you in changing your Belkin router’s Wi-Fi password. It is recommended that your computer is hardwired to your router when following these steps.

1. Launch a web browser.

2. Enter “http://router” or “192.168.2.1” in the Address bar and press [Enter]. If it doesn’t work, check your router’s IP address.

3. You will be asked to log in using the router’s admin password. If you have not set a customized password, just leave the Password field blank then click Submit.

4. In the left navigation panel, click Security.

5. To change the Wi-Fi password, follow the instructions below:

6. WPA/WPA2-Personal(PSK) – Your current Pre-shared Key (PSK) will be displayed. This is your Wi-Fi security key or password. To change, enter your preferred password in the Pre-shared Key (PSK) > field.

7. Click Apply Changes. You should now have successfully changed your Wi-Fi password.

How to Login to Belkin Wireless G Router?

The Belkin wireless G router supports both Mac and Microsoft computers. Using 64- and 128-bit WEP data encryption for enhanced security of your network, it offers 400ft Wi-Fi support allowing users to free roam anywhere in its vicinity. The Belkin wireless G router also allows 16 users at a time to use its Wi-Fi network, making it perfect to suit all a families needs. The procedure for logging in to your Belkin wireless G router is easily done by following a few simple steps.

1. Use an Ethernet cable to connect your computer to back of your Belkin Wireless router. Use any of the four ports labelled LAN at the back of your router.

2. Open a web browser, such as “Firefox,” “Safari” or “Internet Explorer.”

3. Click on the address bar of your chosen web browser and type in http://192.168.2.1 (this is your routers default IP address). Press “Enter.”

4. Once the page has loaded you will be at the Belkin router login screen. Right-click on “Log in.”

5. Enter when prompted the router password. If you have not changed the password then by default leave the space to enter the password blank.

6. Press Ok and You Should Be Logged in to Your Belkin Wireless Router.

Belkin wireless range extender setup

Whether you’re hooking it up to a wireless or wired internet signal, the installation process directs you to a website that literally walks you through the process step-by-step

Before you begin, ensure that you have the following:

• A Belkin Wi-Fi Range Extender.

• An existing Wi-Fi network and its wireless router’s network name (SSID) and the wireless password.

1. Plug in your range extender into a power outlet that is within the range of your router’s wireless network.

2. Using your Wi-Fi-capable device, locate and connect to the Belkin.setup network.

3. Wait for your device to connect to the Belkin.setup network before proceeding to the next step.

4. Launch a browser and enter “http://belkin.range” in the Address bar then tap Go

5. On the page that opens, tap on getting Started. It will search for your router’s SSID. It will search for your router’s SSID.

6. Select the wireless network you want to extend. Tap Next once did.

7. Wait for the setup to connect to the network

8. When prompted, enter your wireless network’s password then tap Next.

9. Wait for the setup to authenticate your password.

10. If you have a dual-band network, select the second wireless network you want to extend then repeat.

11. Review the Extended Network information. Tap Edit if the information needs to be changed. Otherwise, tap the Create Extended Network button to proceed with the setup.

12. Your extender is now configured.

HOW TO SET DNS SERVER ADDRESS?

When you connect a router to the Internet it gets a few settings from your ISP automatically. One of the settings that the ISP sets in your router are the DNS setting. DNS stands for Domain Name System and it is used to convert Internet names into actual IP addresses.

1. Visit the router’s IP address (http://192.168.2.1) in a new browser window. http://192.168.2.1 is the default Belkin router IP address.

2. Click on DNS under Internet WAN.

3. Enter the router’s password and click Submit.

4. Uncheck Automatic from ISP and type in OpenDNS addresses in DNS Address and Secondary DNS Address.

5. Please write down your current DNS settings before switching to OpenDNS, in case you want to return to your old settings for any reason.

6. The addresses for Open DNS are: 208.67.222.222 and 208.67.220.220

7. Click Apply Changes.

HOW TO UPDATE THE BELKIN WIRELESS DRIVER?

Belkin is a well-known USA-based consumer electronics manufacturer, engaged in adapters, routers, Apple accessories, network switches, hubs, KVM switches, etc. To keep your Belkin devices work at top status, it’s important to regularly update Belkin drivers. Keeping the driver of your Belkin wireless adapter up-to-date will fix issues that you may have encountered while using it.

An updated driver downloaded from the Belkin Support site may also contain device feature enhancements that are not available in the previous versions. This article will guide you on how to download the latest driver for your Belkin wireless adapter.

Before you begin, ensure that you have an active internet connection. If your computer is plugged in to the router but cannot get online, disconnect it from your router and plug it directly into your Cable or DSL modem.

Go to the Belkin Tech Support page, enter the model number of your device in the search bar and press [Enter].
Select your specified product from the search results list to open its product support page. Click on your product under the Product Results section
Click Downloads / Firmware.
On the download article’s page, select the hardware version of your device.
Click the Download link that corresponds to your network adapter’s driver.
You may be asked to specify a location to save the file or it may automatically be saved to a default download location depending on the settings of your web browser. (You may be asked to specify a location to save the file or it may automatically be saved to a default download location depending on the settings of your web browser).
The latest driver is now downloaded to your computer.

How to install the Belkin Camera Setup?

On your iOS device, install the Belkin NetCam App from the App Store®.
Plug in the camera to a power outlet.
On the back of the Wemo NetCam, flip the switch up to begin.
On your iOS device, connect to the Wemo NetCam’s Wi-Fi. Go to Settings > Wi-Fi and tap on the Wi-Fi name in the form of NetCamXXXX.
Once your device is connected to the camera’s Wi-Fi, launch the Belkin NetCam App then tap Yes when you’re prompted to set up the camera.
The App will display a Camera Preview. Tap Connect camera to Internet.
Select your Wi-Fi, enter your Password when prompted, then tap Continue.
Follow the on-screen instructions to create an account and tap Continue when finished.
Enter a Camera Name and Description, then tap Continue. The camera may take a few moments to register with the server.
At the back of your camera, set the switch to DOWN position, then tap Continue.
You’ve now successfully set up your Belkin NetCam. Log in with the account you just created.

METHOD INSTALL THE BELKIN N450 SETUP?

The Belkin N450 Wi-Fi router offers you an ultra-high-speed for the best Internet connection you can enjoy outstanding streaming with the N450.Use several devices throughout your home and achieve up to 450Mbps speeds simultaneously with the dual-band design. Yes, you heard right a double band with advanced technology features for various activities online.

There is no buffering or connections getting lost. The Belkin N450 DB has a budget-friendly design. You receive the wireless router with a matte black finish and stand-up design and look similar to a speaker. The router has the latest IEEE 802.11n/ac standards to work with different mobile and wired devices.

Setting up your Belkin router can be done in two ways:

Using the Setup CD that came with your router
Using the router’s built-in web-based setup page

Verify the internet connection
Connect your computer to the modem using an ethernet cable.
Verify if your computer is getting an internet connection by accessing a website.
Connect the devices together
(Before connecting the modem to the router, unplug the modem first and then the router from the power source).
Using an ethernet cable, connect your modem to the WAN or Internet port of the router.
Plug in your modem and then your router to the power source.
Connect the computer to any of the LAN or ethernet ports of your router. If you are using a wireless computer, you will need to connect it temporarily with an ethernet cable.
Observe the light of your router located at the upper panel of the device. Wait for a few minutes until the light turns solid blue.

Setting up using the CD

The default Network Name (SSID) and Password is necessary before you can connect wireless devices to your router. This information can be verified by looking at your Belkin router’s label. For newer Belkin routers, the SSID and password can be found at the bottom of the router.

Step 1:

Insert your Belkin router’s Setup CD into your computer’s CD Drive. If the CD doesn’t open automatically, browse to your CD drive and double-click on the Belkin Setup CD icon.

Step 2:

Click the setup icon on the CD menu.

Step 3:

When prompted, enter the default Network Name (SSID) and Password found on your router’s label then click Next.

Step 4:

A progress screen will appear while additional software is installed. This may take a few minutes to complete. Once finished, a Success message will appear indicating that you are connected to the internet via your new Belkin Router. Your Belkin router should now be successfully installed.

Accessing the router’s web-based setup page

This allows you to configure your router for wired and wireless internet connection.

Step 1: Open a web browser and enter 192.168.2.1 or http://router in the Address bar.

Step 2: On the Let’s connect to the Internet. page, tap Detect my connection. The router will then establish and test the connection, and then it will check for firmware updates.

Step 3: Once the connection has been established, you will be prompted to modify your Network Name and Password.

Step 4: The router will then verify your Network Name and Password. Once done, click User-added image.

Step 5: Fill in the necessary information on the Register your router window and click Complete Registration.

Step 6: Click the Thanks, take me to the dashboard button. You will be redirected to the Dashboard where you can change your router’s settings.

Now that you have successfully set up your router, you may proceed to connecting your other computers to the Wi-Fi.

The process of Belkin N600 Range Extender Setup

Belkin range extenders help you to access the high-speed Internet connectivity even at dead zones as they repeat the signal from your existing wireless router. Belkin range extender basically picks up the wireless signal from your existing wireless router and extends it to the previously dead areas.

Belkin extender comes with a responsive web-based interface which helps the user to set up their Belkin range extender easily and in very less time.

Attach your devices with the cables to make a connection between them.
Connect your Belkin range extender with the computer using an Ethernet cable.
Plug the one end of Ethernet cable into the Belkin range extender and another end into any LAN port of your computer.
Now, plug the power adapter of your Belkin range extender into the power outlet. Make sure you plug the range extender in the area where you previously experienced bad signal strength.
Before you proceed, you should know your range extender’s default IP address. To know the default IP address of your Belkin range extender, look for the wireless card on the back of your range extender. Wireless network name of your Belkin range extender is also written there.
Launch a web browser on your computer that is connected to the range extender.
Enter the default IP address into the address bar and click Go. You can also navigate to Belkin’s official website for Belkin range extender setup n600.
Now you will be directed to Belkin range extender setup n600 page from where you can set up your range extender without any hassle.
Once you enter the setup page, you will see a tab named “Get Started”. Click on Get Started.
Now, select whether you want to configure 2.4 GHz or 5GHz wireless network and click Next.
Now your range extender setup will take you to wireless network settings. These settings include Network Name, Network Key, and Security Type.
Choose a network name according to you and set a strong password for your Belkin range extender.
Now you will be directed to the last page where you will see a tab named “Create extended network”. Click on it and your range extender will be set up.
In case, you are unable to configure your range extender, don’t worry; reset your range extender. Press and hold the reset button for few seconds and then again follow the above-given instructions to set up your device successfully.

How to install Belkin n300 range extender setup?

If you facing connection issue in your home or office then you must check the reason behind it. Generally, our routers don’t cover the entire home network. They provide wifi signals up to the limited area, beyond that devices get no signals.

Belkin range extender setup via WPS

Your Belkin range extender can be set up wirelessly. A wireless installation that totally depends upon WPS or “Wi-Fi Protected Setup, is the simplest method to set up an extender.
First of all, push or hold the WPS button on Belkin range extender setup n300 for about 2 seconds.
Release the WPS button once you see WPS LED light begin to flash. It indicates that WPS has been started.
Next, push/hold the WPS button on router within 2 minutes, starting of WPS on your Belkin.setup wireless range extender.
Concluding configuration will take place automatically.

Belkin Range Extender Setup via Belkin Setup Wizard

To initiate Belkin Setup Wizard, a user will need a Web-enabled device such as a computer or tablet, a device with Web browsing potential. Generally, every Belkin range extender supports wireless Web setup.

Initially, plug your Belkin range extender setup n300 into a power outlet. Extender must be placed within the range of your router’s wireless network.
Next, detect & connect Belkin.setup network by your wifi-enabled device.
Just in case, you can’t view the network, reset your range extender.
Open a web browser now and type domain name http://belkin.range into browser address bar & click Go button.
Apart from the domain name, you can also use IP address http://192.168.206.1 to access Belkin n300 range extender setup page.
On the opening of the next page, tick on getting started button. This will look out for the router’s SSID.

How to install Belkin Dual-band wireless range extender setup?

The Dual-Band Wireless Range Extender extends the range of your router, providing greater WiFi coverage even in your backyard. It eliminates most dead spots and provides the coverage you need for all your devices.

Simultaneous Dual-Band technology provides speeds of up to 300Mbps and extends the WiFi coverage of your existing router (not included) – so you get coverage wherever you are in your home, even in your backyard.

Before you begin, take note of the following:

Ensure that your router is connected to the internet and that the SSID Broadcast feature of your router has been enabled.

Take note of your Wi-Fi® name and password. If it’s a dual-band router, make sure you have the Wi-Fi name and password of the two networks. The computer has a web browser like Internet Explorer®, Chrome™ or Firefox®.

Place the range extender in an area where the Wi-Fi signal of your router is strong, but near where you want to establish your extended network.
Plugin the power supply of the range extender and make sure that it is powered ON. Shortly, its light will begin to flash blue and orange.
Place your computer near the range extender. Also, make sure your computer is not wired to any other network devices.
Connect your computer to the range extender by opening the list of Wi-Fi networks and selecting Belkin.setup.
Open a web browser, enter http://belkin.range into the Address bar, and follow the on-screen instructions. You can also use http://192.168.206.1 to access the range extender’s web-based setup page.
Once the setup for your range extender is complete, you may connect the computer to its Wi-Fi.

How to Setup Belkin AC1200?

Turn off your modem by disconnecting its power supply. Some modems have a battery backup; this will need to be disconnected at this time as well.
Connect your Router to your modem using the cable (already attached). Power up your modem by plugging in its power supply.
If your modem has a battery backup, it can be reconnected at this time; you may need to hold the reset button for 10 seconds.
Power up your Router by plugging in its power supply.
The default network name and password are also printed on the foot of the Router.
Use your computer, tablet, or smartphone to connect to the wireless network shown on the network ID card.
If the page does not load, then try visiting http://192.168.2.1 to see the router homepage. Click the “Detect my connection” button in green. (If you would rather set up the Router manually, click the “set it up manually” link and proceed to page 10.)
After several moments, your Router should automatically detect your Internet connection and restart. This can take anywhere from 30 seconds to 3 minutes depending on your connection type.
Once your Router is online, it will determine if there is a firmware update available and offer to install it. Please allow up to 5 minutes for the firmware to update.
At the next screen, you will be invited to change your network name and password. Re-using your previous network name (SSID) and password makes connecting your existing devices to the new router much easier.
If you decide to change these settings, then enter the new values and click “Save and Continue.”
Please take this opportunity to register your Router. This will help technical support if there is a problem with your Router.

What are the Simple Steps For Belkin Range Wireless Setup?

Have you ever Needed to Extend the strength & Signal Quality of Home? If Yes than Belkin wireless range extender is one of the best tools. Belkin range extender helps your increase the range & the signal quality of your existing wireless router network. With right steps, you can setup Belkin wireless range extender in just 5 minutes

The Belkin Wi-Fi Range Extenders are devices that act as repeaters for the router’s wireless signal. They can be set up without using cables and wires. The steps below will guide you on how to set up your range extender wirelessly.

Before you begin, ensure that you have the following:

A Belkin Wi-Fi Range Extender.
An existing Wi-Fi® network and its wireless router’s network name (SSID) and the wireless password.
A wifi operating device (Tablet, laptop, etc)
Plugin your range extender into a power outlet that is within the range of your router’s wireless network.
Using your Wi-Fi-capable device, locate and connect to the Belkin. setup network.
Wait for your device to connect to the Belkin. setup network before proceeding to the next step.
Launch a browser and enter “http://belkin.range” in the Address bar then tap Go.
On the page that opens, tap on getting Started.
It will search for your router’s SSID.
Select the wireless network you want to extend. Tap Next once did.
Wait for the setup to connect to the network.
When prompted, enter your wireless network’s password then tap Next. Wait for the setup to authenticate your password.
Review the Extended Network information. Tap Edit if the information needs to be changed. Otherwise, tap the Create Extended Network button to proceed with the setup.
Your extender is now configured.